PRODUCTS
AD-2366 mobile phone walk through metal detector
Download:
Application:
Prison, detention center, army, military industry, public security, government departments, drug rehabilitation center, research and development center, trading center, business conference place, large enterprises and other enterprises.
Detection range:
It can accurately detect the electronic products such as mobile phones, laptops, digital camera and video camera which was in the state of boot or shutdown (including removing the battery, remove the SIM card), and it can give an alarm according to the location. (It can exclude the daily carry-on metal objects such as cigarettes, lighters, belt buckle, a chain of keys.
Performance and characteristics:
1. The signal sorting and filtering unit is composed of the unit and the analog board to realize the acquisition of specific weak analog signals and the amplification of frequency selection.
2. Detection system: There are 10 detection units inside each door. The thickness of the door is less than 8 cm, the width of the whole device is less than or equal to 91 cm, and the gross weight is less than 110 kg.
3. The detection system is composed of detection units, which has the anti-interference ability and can adopt to the installation site that has a large metal interference. For example, communication equipment detectors can be installed and used side by side with spacing no more than 30 cm.
4. Technology: Electromagnetic induction principle and eddy current effect technology and digital signal processing technology.
5. The sampling processing module (acquisition card) adopts the structure of "floating-point operation microprocessor +FPGA field programmable gate array", the microprocessor main frequency >100MHz, Flash>256KB, FPGA field programmable gate array match sampling chip to perform dual channel signal sampling, sampling speed >20MHz. With the corresponding embedded software to achieve the function of sampling processing.
6. When the people pass in a normal and standard manner, on the premise of excluding metal objects such as watches, cigarettes, lighters, belt buckles, key chains and other daily carry-on objects, device can detect smart phones (include remove battery and SIM card), and laptops which are on the state of on or off. Even if the phone is wrapped in five layers of copper foil, or put in a pocket, the device will give an alarm when people go through the detector.
7. It can give an alarm for mobile phone which was removed the telephone receiver and microphone.
8. When the people pass with mobile phone, the device will be alarm in real time, the alarm time is less than 1s, passing rate is more than 30 people per minute.
9. The control module of inspection system can eliminate the interference of magnet and magnetic belt buckle to detect the mobile phone hidden under belt.
10. There is no blind spot in the top area. More than four people with different heights (the height difference is more than 4 cm for each one) can be detected with their smart-phones that hidden inside the top of their heads. The accuracy rate is more than 90%.
11. The device can give a text and image prompts for the category of alarm objects. Categories of objects should be at least three categories. For example, mobile phones, hacking knives and guns, tin cans.
12.The control module of system should reserve peripheral interfaces, which can realize the linkage with turnstile. Once it is found that the tested personnel carry mobile phone, turnstile is in the closed state, and the people can’t pass. On the contrary, without carrying a mobile phone, the tested personnel can pass.
13. The system control module should be linked with the peripheral intelligent display terminal, and the intelligent display terminal is required to display the alarm location of virtual human-type, and display the category of alarm objects in the form of pictures.
16. The display terminal has the function of recording the number of passing people and alarm and storing historical data. According to requirements to extract information such as alarm time and alarm objects.
1. Detection speed: within 0.5 s, (fast speed)
2. Passing rate: ≥40 people/min (high efficiency)
3. External power source: 110V~230V
4. Frequency: 50/60HZ
5. Power consumption: 60W
6. Working environment: -20℃~45℃
7. Gross weight: 100kg
8. External dimension: 2220*850*650 mm
9. Channel dimension:2000*700*650 mm